A novel combined recirculating treatment system for intensive marine aquaculture

This study established a pilot‐scale recirculating treatment system that coupled an ecological process with a biological process to achieve adequate water quality and to minimize the water consumption for intensive marine culture. The recirculating treatment system consisted of a settling cell, a biofilter tank, a bivalve tank and gravel beds. The toxic pollutants, threatening the growth of bivalves, were reduced by the settling cell and the biofilter tank, so that the polyculture of shrimp and bivalves could be achieved. The living bivalve tank could function well as a remover of remaining small suspended solids (SS), and other pollutants. As the SS was reduced to a very low level by bivalve tank before the water flowing into the gravel beds, the risk of clogging was prevented. The studies suggested that the system maintained high removal efficiencies of SS, ammonium nitrogen () and nitrite nitrogen () and could contribute to the increase in shrimp yield.     

内生菌与雷公藤细胞悬浮共培养的生理生化特性

将2株雷公藤内生真菌Fusarium oxysporum NS33与Penicillium steckii NS6、2株内生细菌Enterobacter cloacae sub sp LG3与Serratia marcescens LY1及其组合分别与雷公藤细胞悬浮共培养,对不同培养体系内雷公藤细胞的生长及其生理生化特征进行研究。结果显示,在共培养前期,与对照相比,接种单一内生菌株提高了细胞的干重,其中菌株NS6的促生效果最明显;而在共培养后期,无论是单一内生菌还是混合内生菌均对细胞生长具有抑制作用。内生真菌和菌株组合处理的培养液p H值有明显的升高,而内生细菌LY1则明显降低了培养液的p H值,其具有产酸性。另外,当雷公藤细胞同混合菌株共培养时,培养基中总糖消耗量是最大的,而接种单独菌株时则对细胞可溶性蛋白含量具有一定的提高作用。接种内生菌会影响雷公藤细胞的POD、CAT及SOD活性,与对照相比,接种单独菌株会更加提升POD与CAT的活性,而细胞MDA含量则明显下降。     

Seed growth of three perennial ryegrass cultivars sown on two dates and treated with trinexapac ethyl straw shortener

First‐year crops of diploid perennial ryegrass (cvs. Meridian, Bronsyn and Grasslands Impact) were sown on 1 April and 14 May 2008. Applications of trinexapac ethyl (TE) plant growth regulator at 0, 200 and 400 g a.i. ha^?1 were used to shorten stems to examine the impact of seed growth. Seed filling followed a consistent sigmoidal growth pattern with a lag phase of 127°C days, and linear duration of 390°C days. Time to 95% of final seed weight was 517°C days. Seed yield increases from TE were from higher numbers of first‐grade seeds m^?2, achieved by a higher rate of seed filling during the linear phase of 0·115 mg per °C day per spike. For all cultivars, the maximum stem dry weight occurred at 310–400°C days post‐anthesis, which suggest the stem was a strong sink. As seeds developed, their demand for assimilate increased and they drew more from the stem. At harvest, stem weights from TE treatments were 25% heavier than at anthesis, while untreated ‘Bronsyn’ and ‘Grasslands Impact’ stems were similar to those at anthesis. Thus, stems treated with TE contributed assimilates to increase seed yield but were still a net sink with assimilates in the stem at harvest. Trinexapac ethyl rate induced an inverse relationship between seed yield and stem height. This showed that competition for assimilate between stems and growing seeds limited the seed yield. Management or genetic factors that reduce stem height are likely to increase seed yields of perennial ryegrass.     

Selection efficiency of high inorganic phosphorus-low stachyose lines from soybean breeding populations of different genetic backgrounds

Reducing the antinutritional components of soybean (Glycine max) seed is necessary for producing animal feed with increased metabolizable energy and nutrient availability. The objective of this study was to evaluate marker-assisted and phenotypic selection for the high inorganic phosphorus (Pi) and low stachyose traits controlled by the Lpa and MIPS1 mutations in six breeding populations. Phenotypic selection for low phytate individuals carrying Lpa mutations using Pi was reliable, but the assay should include parental genotypes to construct thresholds before performing selections, as the effect of Lpa on Pi depends on genetic background. Phenotypic selection for low phytate individuals carrying MIPS1 using Pi should be complemented with sugar data because selection based solely on Pi may be inefficient, as this trait is not environmentally stable in MIPS1 germplasm. Marker-assisted selection for simple sequence repeat (SSR) linked to Lpa2 (Satt527, Satt561) depended on the pedigree of the population suggesting that perfect markers (e.g., single nucleotide polymorphism) should become the molecular tool for screening a large number of progenies with high efficiency.     

菠萝蜜种子淀粉制备香草兰微胶囊的工艺研究

以菠萝蜜种子淀粉为壁材,采用饱和水溶液法制备香草兰精油微胶囊,以包埋产率为指标,采用响应面分析法对微胶囊的包埋条件进行优化探讨。结果表明:5个单因素中,影响最显著的因素为壁芯材比例、包埋温度和包埋时间。响应面优化得到香草兰精油微胶囊的最佳工艺条件为壁芯材比例为7.5∶1;包埋时间72 min;包埋温度54℃,此条件下的包埋产率为(95.46±0.2)%,包埋率为(76.35±0.6)%,载油量为(27.73±0.3)%。试验证明,此条件结果与模型预测值相吻合,此工艺条件可为菠萝蜜种子淀粉包埋香草兰精油微胶囊工艺提供理论依据。     

An investigation on the effect of heat-moisture treatment on baking quality of wheat by using response surface methodology

Effect of heat-moisture treatment on quality properties of two bread wheats (cvs. Tosunbey and Bayraktar) were investigated by using response surface methodology (RSM). Temperature and moisture conditions in the experimental design were in the range of 55–95 °C and 13–19%. Heat-moisture treated grains were milled into flour and quality properties were determined. The optimum moisture-temperature combination for the highest dry gluten, Zeleny sedimentation, Alveograph W and bread volume values were estimated as 14%-63 °C for Tosunbey and 19%-55 °C for Bayraktar samples. Alveograph W seems to be a good indicator of baking quality for wheats treated at higher temperatures. In order to describe the relationship between the dependent and independent variables (moisture, temperature), the response values were fitted by second order polynomial models. Significance analysis showed that the effect of both moisture and temperature on dry gluten content, sedimentation and falling number values for Tosunbey; falling number and damaged starch values for Bayraktar were significant (p < 0.05). The effect of temperature on Farinograph water absorption, W and P/G, bread volume and firmness values were significant for both cultivars (p < 0.05). It can be concluded that improvement in baking quality can be achieved and flours with different properties can be produced by heat-moisture treatments on wheat.     

Effect of high inclusion of rendered animal by‐product ingredients on growth,digestibility and economic performances in climbing perch Anabas testudineus

A 70‐day growth trail was conducted to investigate the effects of inclusion of high levels of meat and bone meal (MBM) and protein concentrate (PC) on growth, digestibility and economic performances of climbing perch, Anabas testudineus. Four isonitrogenous diets were formulated by lowering the level of dietary fishmeal protein at 0 (D₁, control), 70 (D₂), 85 (D₃) and 100% (D₄) with a mixture of MBM and PC protein (1:1). Triplicate groups of 300 fish (mean weight of 0.80 g) stocked in each 40 m² pond and fed the respective test diets. A digestibility trial was conducted after the growth trial in indoor glass aquarium. The result showed that growth parameters were significantly decreased (P < 0.05) with fishmeal replacement levels. However, significant differences were not found in feed conversion ratio and survival of fish. No difference was also found in protein efficiency ratio among D1, D2 and D3. Similar to growth parameters, total fish production was highest in D1, intermediate in D2 and D3; and lowest in D4. Apparent digestibility coefficients of dry matter, protein and lipid were highest (P < 0.05) in D1 and lowest in D4. The economic analysis revealed that the benefit cost ratio was ranked by D₃ (1.81), D₂ (1.71), D₁ (1.66) and D₄ (1.46) respectively. Upon considering the overall performances and unavailability of finite protein sources, it can be concluded that 70–85% fishmeal could be replaced with a mixture of MBM and PC (1:1) in practical diets for climbing perch.     

Revisiting rice breeding methods – evaluating the use of rapid generation advance (RGA) for routine rice breeding

Rice production needs to increase in the future in order to meet increasing demands. The development of new improved and higher yielding varieties more quickly will be needed to meet this demand. However, most rice breeding programmes in the world have not changed in several decades. In this article, we revisit the evidence in favour of using rapid generation advance (RGA) as a routine breeding method. We describe preliminary activities at the International Rice Research Institute (IRRI) to re-establish RGA on a large scale as the main breeding method for irrigated rice breeding. We also describe experiences from the early adoption at the Bangladesh Rice Research Institute. Evaluation of RGA breeding lines at IRRI for yield, flowering time and plant height indicated transgressive segregation for all traits. Some RGA lines were also higher yielding than the check varieties. The cost advantages of using RGA compared to the pedigree method were also empirically determined by performing an economic analysis. This indicated that RGA is several times more cost effective and advantages will be realized after 1 year even if facilities need to be built. Based on our experience, and previous independent research empirically testing the RGA method in rice, we recommend that this method should be implemented for routine rice breeding in order to improve breeding efficiency.     

Simultaneous selection for seed and forage production in cocksfoot (Dactylis glomerata): application of drought tolerance and susceptibility indices

An experiment was conducted to estimate drought tolerance of some cocksfoot genotypes based on seed and forage yield and related indices (including tolerance index, mean productivity, geometric mean productivity, reduction percentage index, stress tolerance index and stress susceptibility index) and to identify relationships between measured traits. Twenty‐five genotypes were evaluated in the field under control and drought‐stress environments over 2 years. The results revealed a high variation for seed yield and forage yield and the measured indices under both moisture conditions. No correlation was observed between seed yield and forage yield under the control treatment, but this correlation was positively significant under the water‐stress treatment. Drought‐tolerant and susceptible genotypes were identified based on seed and forage yield performance. Genotypes 2, 4 and 7 had high seed yield, while genotypes 7 and 10 had high forage yield under both stressed and non‐stressed conditions and were identified as the most tolerant genotypes in each category. The results also revealed that genotypes 1, 2, 4, 6, 7, 8 and 24 had relatively high seed and forage yield in both control and drought‐stressed conditions. These genotypes can be used for further studies to improve both seed and forage yields concurrently.     

湿热处理制备马铃薯抗性淀粉工艺优化

为获得湿热处理制备马铃薯抗性淀粉的最适工艺参数，以抗性淀粉得率为考察指标，研究淀粉含水量、湿热处理温度和湿热处理时间对抗性淀粉得率的影响。在单因素试验的基础上进行正交优化，确定了制备马铃薯抗性淀粉的最佳工艺条件为：淀粉含水量30%，湿热处理温度90 ℃，热处理时间90 min。在此条件下制得的抗性淀粉得率为26.63%。淀粉经过湿热处理后仍然保持偏光十字，为颗粒型抗性淀粉。